Bit Manipulation, Easy

Question

Given a positive integer, output its complement number. The complement strategy is to flip the bits of its binary representation.

Note:

1. The given integer is guaranteed to fit within the range of a 32-bit signed integer.
2. You could assume no leading zero bit in the integer’s binary representation.

Example 1:

1
2
3

Input: 5
Output: 2
Explanation: The binary representation of 5 is 101 (no leading zero bits), and its complement is 010. So you need to output 2.

Example 2:

1
2
3

Input: 1
Output: 0
Explanation: The binary representation of 1 is 1 (no leading zero bits), and its complement is 0. So you need to output 0.

Greedy, Easy

Question

Assume you are an awesome parent and want to give your children some cookies. But, you should give each child at most one cookie. Each child i has a greed factor gi, which is the minimum size of a cookie that the child will be content with; and each cookie j has a size sj. If sj >= gi, we can assign the cookie j to the child i, and the child i will be content. Your goal is to maximize the number of your content children and output the maximum number.

Note:
You may assume the greed factor is always positive.
You cannot assign more than one cookie to one child.

Example 1:

1
2
3
4
5
6
7

Input: [1,2,3], [1,1]
Output: 1
Explanation: You have 3 children and 2 cookies. The greed factors of 3 children are 1, 2, 3. 
And even though you have 2 cookies, since their size is both 1, you could only make the child whose greed factor is 1 content.
You need to output 1.

Example 2:

1
2
3
4
5
6
7

Input: [1,2], [1,2,3]
Output: 2
Explanation: You have 2 children and 3 cookies. The greed factors of 2 children are 1, 2. 
You have 3 cookies and their sizes are big enough to gratify all of the children, 
You need to output 2.

Stack, Easy

Question

You are given two arrays (without duplicates) nums1 and nums2 where nums1’s elements are subset of nums2. Find all the next greater numbers for nums1‘s elements in the corresponding places of nums2.

The Next Greater Number of a number x in nums1 is the first greater number to its right in nums2. If it does not exist, output -1 for this number.

Example 1:

1
2
3
4
5
6

Input: nums1 = [4,1,2], nums2 = [1,3,4,2].
Output: [-1,3,-1]
Explanation:
    For number 4 in the first array, you cannot find the next greater number for it in the second array, so output -1.
    For number 1 in the first array, the next greater number for it in the second array is 3.
    For number 2 in the first array, there is no next greater number for it in the second array, so output -1.

Example 2:

1
2
3
4
5

Input: nums1 = [2,4], nums2 = [1,2,3,4].
Output: [3,-1]
Explanation:
    For number 2 in the first array, the next greater number for it in the second array is 3.
    For number 4 in the first array, there is no next greater number for it in the second array, so output -1.

Note:

1. All elements in nums1 and nums2 are unique.
2. The length of both nums1 and nums2 would not exceed 1000.

Stack, Easy

Question

Design a stack that supports push, pop, top, and retrieving the minimum element in constant time.

• push(x) – Push element x onto stack.
• pop() – Removes the element on top of the stack.
• top() – Get the top element.
• getMin() – Retrieve the minimum element in the stack.

Example:

1
2
3
4
5
6
7
8

MinStack minStack = new MinStack();
minStack.push(-2);
minStack.push(0);
minStack.push(-3);
minStack.getMin();   --> Returns -3.
minStack.pop();
minStack.top();      --> Returns 0.
minStack.getMin();   --> Returns -2.

Stack, Easy

Question

Implement the following operations of a stack using queues.

• push(x) – Push element x onto stack.
• pop() – Removes the element on top of the stack.
• top() – Get the top element.
• empty() – Return whether the stack is empty.

Notes:

• You must use only standard operations of a queue – which means only push to back, peek/pop from front, size, and is empty operations are valid.
• Depending on your language, queue may not be supported natively. You may simulate a queue by using a list or deque (double-ended queue), as long as you use only standard operations of a queue.
• You may assume that all operations are valid (for example, no pop or top operations will be called on an empty stack).

Stack, Easy

Question

Implement the following operations of a queue using stacks.

• push(x) – Push element x to the back of queue.
• pop() – Removes the element from in front of queue.
• peek() – Get the front element.
• empty() – Return whether the queue is empty.

Notes:

• You must use only standard operations of a stack – which means only push to top, peek/pop from top, size, and is empty operations are valid.
• Depending on your language, stack may not be supported natively. You may simulate a stack by using a list or deque (double-ended queue), as long as you use only standard operations of a stack.
• You may assume that all operations are valid (for example, no pop or peek operations will be called on an empty queue).

Stack, Easy

Question

You’re now a baseball game point recorder.

Given a list of strings, each string can be one of the 4 following types:

1. Integer (one round’s score): Directly represents the number of points you get in this round.
2. "+" (one round’s score): Represents that the points you get in this round are the sum of the last two valid round’s points.
3. "D" (one round’s score): Represents that the points you get in this round are the doubled data of the last valid round’s points.
4. "C" (an operation, which isn’t a round’s score): Represents the last valid round’s points you get were invalid and should be removed.

Each round’s operation is permanent and could have an impact on the round before and the round after.

You need to return the sum of the points you could get in all the rounds.

Example 1:

1
2
3
4
5
6
7
8

Input: ["5","2","C","D","+"]
Output: 30
Explanation: 
Round 1: You could get 5 points. The sum is: 5.
Round 2: You could get 2 points. The sum is: 7.
Operation 1: The round 2's data was invalid. The sum is: 5.  
Round 3: You could get 10 points (the round 2's data has been removed). The sum is: 15.
Round 4: You could get 5 + 10 = 15 points. The sum is: 30.

Example 2:

1
2
3
4
5
6
7
8
9
10
11

Input: ["5","-2","4","C","D","9","+","+"]
Output: 27
Explanation: 
Round 1: You could get 5 points. The sum is: 5.
Round 2: You could get -2 points. The sum is: 3.
Round 3: You could get 4 points. The sum is: 7.
Operation 1: The round 3's data is invalid. The sum is: 3.  
Round 4: You could get -4 points (the round 3's data has been removed). The sum is: -1.
Round 5: You could get 9 points. The sum is: 8.
Round 6: You could get -4 + 9 = 5 points. The sum is 13.
Round 7: You could get 9 + 5 = 14 points. The sum is 27.

Note:

The size of the input list will be between 1 and 1000.

Every integer represented in the list will be between -30000 and 30000.

Dynamic Programming, Easy

Question

Say you have an array for which the ith element is the price of a given stock on day i.

Design an algorithm to find the maximum profit. You may complete as many transactions as you like (i.e., buy one and sell one share of the stock multiple times).

Note: You may not engage in multiple transactions at the same time (i.e., you must sell the stock before you buy again).

Example 1:

1
2
3
4

Input: [7,1,5,3,6,4]
Output: 7
Explanation: Buy on day 2 (price = 1) and sell on day 3 (price = 5), profit = 5-1 = 4.
             Then buy on day 4 (price = 3) and sell on day 5 (price = 6), profit = 6-3 = 3.

Example 2:

1
2
3
4
5

Input: [1,2,3,4,5]
Output: 4
Explanation: Buy on day 1 (price = 1) and sell on day 5 (price = 5), profit = 5-1 = 4.
             Note that you cannot buy on day 1, buy on day 2 and sell them later, as you are
             engaging multiple transactions at the same time. You must sell before buying again.

Example 3:

1
2
3

Input: [7,6,4,3,1]
Output: 0
Explanation: In this case, no transaction is done, i.e. max profit = 0.

Related to the Question “122.Best time to Buy and Sell Stock”

Dynamic Programming, Easy

Question

On a staircase, the i-th step has some non-negative cost cost[i] assigned (0 indexed).

Once you pay the cost, you can either climb one or two steps. You need to find minimum cost to reach the top of the floor, and you can either start from the step with index 0, or the step with index 1.

Example 1:

1
2
3

Input: cost = [10, 15, 20]
Output: 15
Explanation: Cheapest is start on cost[1], pay that cost and go to the top.

Example 2:

1
2
3

Input: cost = [1, 100, 1, 1, 1, 100, 1, 1, 100, 1]
Output: 6
Explanation: Cheapest is start on cost[0], and only step on 1s, skipping cost[3].

Note:

1. cost will have a length in the range [2, 1000].
2. Every cost[i] will be an integer in the range [0, 999].

Related to Question 70. Climbing stairs

Dynamic Programming, Easy

Question

You are climbing a stair case. It takes n steps to reach to the top.

Each time you can either climb 1 or 2 steps. In how many distinct ways can you climb to the top?

Note: Given n will be a positive integer.

Example 1:

1
2
3
4
5

Input: 2
Output: 2
Explanation: There are two ways to climb to the top.
1. 1 step + 1 step
2. 2 steps

Example 2:

1
2
3
4
5
6

Input: 3
Output: 3
Explanation: There are three ways to climb to the top.
1. 1 step + 1 step + 1 step
2. 1 step + 2 steps
3. 2 steps + 1 step